For the “Bibliobandido, Story Eater” exhibition by Marisa Jahn at the Sugarhill Children’s museum of Art and Storytelling in NYC. 2018
D.A.P Temporary Bookstore at the 2007 Armory art fair NYC
“…the sidewalks and the streets, the concrete and the clay beneath my feet, begin to crumble…”
Like a glass-bottom boat, our proposal attempts to bring to mind the fragile dynamism,
of our natural environment by reminding pedestrians of the world beneath the urban fabric.
Public Park, Cafe and Children’s Playground. Concept, design and construction Management. Graz, Austria. 2003
For Acconci Studio
Retractable pedestrian bridge and cafe, for the Port of Boulogne Sur Mer. Boulogne Sur Mer, France. 2006
Indoor Park and Waiting Area, Philadelphia International Airport, 2000
For Acconci Studio
Reactive Lighting for Boston’s Copley Square. 2012
ADNA + Dari Parvanov, Ian Lipsky, Josh Merlis, Nilima Rabl, Liam Bradfield.
Our project consists of 1,657 beams of light that shoot up from the ground of Copley Square. They can be bright, but they dim as you approach them. When you stand or walk over them, they go dark. They can be any color.
The beams of light are projected from high-power L.E.D. lamps installed on actuated gimbals. The gimbals point the beams depending on the stimuli from sensors also embedded within the lamps. The beams of light react to you; they know where you are; they sense your movement through the park. They can dance with you. They bob as if they were floating, They can open up around you. Some shine upright but tenuously. Some stay slanted after shifting their glare away from a passing pedestrian’s eyes.
The lamps are always lit with a power inversely proportional to the glow of the sky as if running away from the sun; but because pedestrians can turn them off for a little while by just walking over them, the more the park is used the less power it will consume.
Other lamps are shining their beams on the existing monuments and statues; but these beams can also move, shift, slowly, gently illuminating the statues and obelisks, the hare and the turtle, the fountain–but never settling on one place.
Or you walk into a room of light. It’s not like a conventional room, but like a conventional room it surrounds you. And it’s more than that: this room is everywhere you walk; the room of light follows you around. Eventually you can escape the room of light; you can leave it behind waiting to surround the next passer-by.
Or you can leave a trail of darkness as you run across the park; in the middle of the night, the trail of darkness lingers for a while. For a while, you can change your mind and retrace your steps.
You can see the beams of light because a thin water mist floats and drifts all around you–the mist comes from an array of spouts embedded within the grass and the flower gardens. Weather sensors control the flow of the mist.
The lamps are all connected; they form a network. The networked connections between the lamps are the joints between concrete tiles or precision water jet cuts on the existing brick pavement. No two tiles are the same. Sealing the canals or the joints are side-emitting fiber optic cables that draw their light from the lamps they connect.
Lamps closer to the edges of the park’s pathways and sidewalks point to mirrors arrayed on top of an electronic photo-automaton. Like a phototropic plant, the photo-automaton’s mirrors move, shift and rotate depending on the direction the light beams are coming from; they reflect and guide the light back down, sharp as it arrived, or diffused, or perhaps refracted through prisms and crystals. The photo automatons will replace the existing park’s lamps.
Masdar, U.A.E. 2010
Windstalk is a concept for a wind powered electricity generator that is also a public space.
Our project takes clues from the way the wind sways a field of wheat, or reeds in a marsh.
Our project consists of 1203 stalks, 55 meters high, anchored to the ground with concrete bases that range between 10 to 20 meters in diameter. The stalks are made of carbon fiber reinforced resin poles, 30 cm in diameter at the base and 5 cm at the top. The top 50 cm of the poles are lit up by an LED lamp that glows and dims depending on how much the poles are swaying in the wind. When there is no wind—when the poles are still—the lights go dark.
The bases that support the poles are laid along the site following a phyllotactic distribution, the kind we see in the center of a sunflower. The bases all touch each other, forming a kind of carpet, a kind of fabric.
The bases of the stalks, are all shaped like a elliptical vortice. When it rains, the rain water slides down the slopes of the bases to collect in the spaces between, concentrating scarce water. Here, plants can grow wild.
You can walk on the bases of the poles; you can traverse the whole site by walking from base to base. You can lean on the slopes, lie down, stay awhile and listen to the sound the wind makes as it rushes between the poles.
Within each hollow pole is a stack of piezoelectric ceramic discs. Between the ceramic disks are electrodes. Every other electrode is connected to each other by a cable that reaches from the top to the bottom of each pole. One cable connects the even electrodes, and another cable connects the odd ones. When the wind sways the poles, the stack of piezoelectric disks is forced into compression, thus generating a current through the electrodes.
Within each concrete base is a hollow chamber that houses a torque generator.
The generator converts the kinetic energy of the swaying poles into electrical energy by way of an array of current generating shock absorbers, which convert energy produced by the forced movement of fluid through the shock absorbent cylinders.
The electricity that our project generates isn’t constant, it depends on the wind.
To compensate we make a kind of battery, a capacitor, a way to store energy:
Below the field of poles are two very large chambers, chambers as large as the whole site. The chambers are shaped like the bases of the poles but inverted, then inverted again, and again and once more.
There’s upper chamber and a lower one beneath. When the wind blows, part of the electricity generated powers a set of pumps, the pumps move water from the lower chamber to the upper one. When the air is still–when there is no wind– the water from the upper chamber flows down again turning the pumps into generators.